You are not allowed to perform this action
Sidebar
Volume 52, 2024.
No 4
- Ali M. H. Al-Obaidy, Ekhlas M. Fayyadh, Amer M. Al-Dabagh, Experimental Investigation of Pool Boiling Performance on Hybrid Surfaces
- San L.Tolentino, Jorge Mírez, Omar González, Evaluation of Turbulence Models for Incompressible Flow in a Venturi Tube
- Thong Duc Hong, Hieu Xuan Vo, Truyen Hung Luong, Minh Quang Pham, Son Hoang Do, Effect of Ignition Timing and Combustion Duration on the Performance Characteristics of a Diesel Engine Using Vibe 2-Zone Model
- Miodrag D. Milenković-Babić, Dušan A. Ivković, Branislav G. Ostojić, Biljana Z. Dovatov, Milenko S. Trifković, Vuk D. Antonić, Flying Wing Conceptual Design and Flight Testing
- Huifeng Wang, Stefanija Klaric, Sara Havrlišan, Preliminary Study of Bead-On-Plate Welding Bead Geometry for 316L Stainless Steel Using GMAW
- R. Pramod, Veeresh Kumar G.B., Basavarajappa S., Investigation of the Effect of Drilling Induced Delamination and Tool Wear on Residual Strength in Polymer Nanocomposites
- Paweł Karolczak, Maciej Kowalski, Evaluation of the Applicability of Fractal Analysis to Describe the Surface of Aluminium Composites after Drilling
- Minh Quang Pham, Thang Viet Vu, Lam Quang Tran, Huong Huu Nguyen, Thong Duc Hong, Study on Kinetics and Dynamics of the Scraping-pressing Mechanism of the Compactor Garbage Truck
- Anas Chtioui, Aissa Ouballouch, Ahmed Mouchtachi, Investigation of Cutting Responses During High-speed Machining of Ti6Al4V Alloy: Finite Element Analysis
- Djamel Bekhouche, Ali Bouchoucha, Hamid Zaidi, Optimization of Friction and Electrical Resistance Performance in Graphite-Copper Electrical Contacts Using Taguchi-based Grey Relational Analysis
- Hambal Tella, Mohamed A. Mohandes, B. Liu, Ali Al-Shaikhi, Shafiqur Rehman, A Novel Cost-Function for Transformer-based YOLO Algorithm to Detect Photovoltaic Panel Defects
- Azzam Homeida, Omar Algrouni, Shafiqur Rehman, Zeeshan Anwar, Techno-economic Analysis of a Wind/ Solar PV Hybrid Power System to Provide Electricity for Green Hydrogen Production
- Junhao Huang, Ferenc Safranyik, JánosTóth, István Keppler, Shear Test as Calibration Experiment for DEM Simulations: Sphero-polygonal Particle Model
- Phan Xuan Trung, Dang Anh Duy, Design and Develop a Robot Arm to Automatically Feed Workpieces for Laser Engraving Machines
- Helder A. G. Pinto, Francisco J. G. da Silva, Rafael R. Lucas, Rita C.M. Sales-Contini, Die Casting Thermal Diffusion Study Using the Rao and Schumacher Theory
Volume 52, 2024.
No 3
- Ali Riza Motorcu, Ergün Ekici, Shivi Kesarwani, Rajesh Kumar Verma, Evaluation of Machining Characteristics and Tool Wear During Drilling of Carbon/Aluminium Laminated
- Ibraim Alibek, Absadykov Bakhyt, Sanjin Troha, Kristina Marković, Željko Vrcan, Efficiency-based Methodology for the Selection of Electric Motors for Mini-tractor Propulsion
- Samiha Zrinej, Nor-Eddine Laghzale, Abdel-Hakim A. Bouzid, Elastic-Plastic Stress Analysis of Shrink-fitted Thick FGM Cylinders
- M. El Amine, K. Hmina, M. Sallaou, Integration of Behavior Models’ Accuracy in Design Decisions Using AHP, FMEA and Physical Prototyping
- Mamatha K. M., U.S. Mallik, Vishwanath Koti, K.V. Shivananda Murthy, Praveennath G. Koppad, Effect of Variations in Mn Content on Mechanical and Corrosion Characteristics of Cu-Al-Mn Shape Memory Alloys
- Yingshuai Zhang, Yiyong Yang, Jia Cheng, Linhong Ji, Research on the Cooling Garment Based on Acupoints Cold Stimulation under a High-Temperature Environment
- Akash T. Jadhav, Payal V. Tembhurnikar, Mrunal S. Bhosale, Jhumki Nandy, MD Gulam Sarwar, Devabrata Sahoo, Effect of Size and Location of an Intermediate Aerodisk Mounted Sharp Tip Spike on the Drag Reduction over a Hemispherical Body at Mach 2.0
- Biljana Prochaska, Nebojša Radić, Srđan Bulatović, The Mechanical Modeling of Thermomechanical Processes for Thin-Walled Cylinders
- Pradipkumar M. Gavali, S. D. Yadav, Predicting Automotive Air Conditioning System Performance through Deep Learning
- Prasanta Kumar Samal, Sunil K., Imran M Jamadar, Srinidhi R., AI-Enhanced Fault Diagnosis in Rolling Element Bearings: A Comprehensive Vibration Analysis Approach
- H.S. Hussain, M.J.M. Ridzuan, M.S. Abdul Majid, M. T. A. Rahman, Mohd Shihabudin Ismail, Azduwin Khasri, Ferriawan Yudhanto, Effects of Nanofillers on the Wear and Frictional Properties of Cellulosic Fibre-reinforced Composites Under Varying Applied loads
- Ahmed Ali Farhan Ogaili, Kamal Abdulkareem Mohammed, Alaa AbdulhadyJab, Ehsan Sabah Al-Ameen, Automated Wind Turbines Gearbox Condition Monitoring: A Comparative Study of Machine Learning Techniques based on Vibration Analysis
- M. R. Mohamed, A. A. Ali, A. A. Roshdy, M. A. Fayed, Incorporating Motion of Upper and Lower Platforms: A Generalized Inverse Kinematic Model for Simulation and Experimental Testing of 6-UPS Stewart Platform
- Lam Phi Nguyen, Ha Quang Thinh Ngo, Framework Design using the Robotic Augmented Reality for the Cyber-Physical System
No 2
- San L.Tolentino, Jorge Mírez, Simón A. Caraballo, Numerical Analysis of the Shock Train in Conical Nozzles with Straight-Cut Throats
- Thong Duc Hong, Minh Quang Pham, Phong Giang, Phat Tan Truong, Huong Huu Nguyen, Study on Designing a Diesel Firefighting Pump System for Residential Building
- Krešimir Osman, Andrija Topčić, Mato Perić, Dragi Stamenković, Presentation of Control Algorithm for Cooling System in Business Building
- Aleksandar Nešović, Danijela Nikolić, Ana Radojević, Numerical and multi-criteria energy flow analysis in the Kragujevac primary school
- M. Polishchuk, O. Rolik, Improvement of Technological Equipment Drone for Water Sampling: Design and Modeling
- Mohamed Abdellatif, Hicham Chibane, Sébastien Dubois, Roland De Guio, Integrating the Generalized Table of Parameters and Contextual Database in an Inventive Design Method to Extract Problems to be Solved
- Catarina Teixeira, Isabel Lopes, Manuel Figueiredo, Spare Parts Stock Management: Classification and Policy Assignment
- K. Hmina, A. Allouch, H. Bouyarmane, M. El Amine, M. Sallaou, TRIZ Effect Exploitation on Engineering Students Thinking Skills in Product Design
- Şehmus Güden, Ali Riza Motorcu, Murat Yazıcı, Examining and Optimizing the Weld Area and Mechanical Performance of Thermoplastic Parts Manufactured by Additive Manufacturing and Welded by Friction Stir Welding
- Sujeet Kumar Chaubey, Kapil Gupta, Investigation on Manufacturing of Small-Sized Stepped Rotor Wheel by Engraving Milling Process
- Dhananjay Gupta, Awadhesh Kumar, Vinod Kumar Giri, Investigations on MIT and Lyapunov Rule-Based Modified MRAC for Non-interacting and Interacting Two-Tank Coupled Systems
- P. Puspitasari, D. D. Pramono, M. N. A. Habiby, Prabowo, A. Jaelani, M. I. H. C. Abdullah, A. Suyetno, Experimental Evaluation of Biolubricant with Additive Nanoparticle Calcium Carbonate (CaCO3) from Scallop Shell Waste as Cutting Fluids using Minimum Quantity Lubrication (MQL) in CNC Milling Process
- R. Kuti, F. Könczöl, L. Csapó, Cs. Papp, L. Földi, Á. D. Tóth, Selection of Engine Oils with Tribological Examinations Applicable to Specially Operated Diesel Engines
No 1
- M. Elgezzar, A. Rashad, M. S. Hassan, T. Elnady, CFD Analysis and Geometrical Parameter Investigation For The Design of A High-Efficiency Supersonic Ejector
- Thanh Truong Nguyen, Thanh Hai Nguyen, Ha Quang Thinh Ngo, Investigation on the Mechanical Design of Robot Gripper for Intelligent Control Using the Low-cost Sensor
- Sergii G. Karnaukh, Oleg E. Markov, Anton A. Lysenko, Research on the New Process of Separating Hollow Work-Piece by Eccentric Torsion Cutting for Stamping
- Le Hoai Phuong, Vo Duy Cong, Control the Robot Arm through Vision-Based Human Hand Tracking
- Imran M. Jamadar, Ajit Kumar Patil, Prasanta Kumar Samal, B. Suresha, An Empirical Model Integrating Dimensional Analysis and Box-Behnken Design for Crack Detection in Rotor Fan Blades
- Ghufran Hamza Omran, Nabaa Sattar Radhi, Basim Ajeel Abass, Synthetic and Characterization of Al-PTFE Functionally Graded Material Using Powder Metallurgy Technique
- Youssef Ouhassan, Seddik Bri, Mohamed Habibi, The Effect of Reinforcement of Alumina Matrix Composites by ZrB2 and FeSiAl Inclusions on the Dielectric Property at Microwave Frequencies
- Hilal H. Nuha, Adil Balghonaim, Rizka Reza Pahlevi, S. Rehman, M. Mohandes, Vertical Wind Speed Extrapolation Using Statistical Approaches
- Varun Kumar A, Pradeep Krishna R, Masood Fakouri Hasanabadi, Sathickbasha K, Evaluation of Machine Learning Techniques for the Nd: YAG Laser & TIG Welded Stainless Steel 304
- Salah Mahmood Shakir, Alaa Abdulhady Jaber, Innovative Application of Artificial Neural Networks for Effective Rotational Shaft Crack Localization
- Ronit Shah, Naveen Venkatesh S, P Arun Balaji, V Sugumaran, Weightless Neural Network-Based Fault Diagnosis in Suspension System
- Vesna Milošević-Mitić, Ana Petrović, Nina Anđelić, Miloš Jovanović, The Influence of Temperature Gradient on Thin Plates Bending
- A. Gritsenko, V. Shepelev, A. Burzev, B.K. Kaliyev, The Development of a Method for Diagnosing Internal Combustion Engines Based on Acceleration and Rundown Characteristics
- Younes Oulahou, Youssef Elguennouni, Mohamed Hssikou, Jamal Baliti, Mohammed Alaoui, Numerical Investigation of Natural Convection Heat Transfer Using TiO2/Al2O3-Water Nanofluids
Универзитет у Београду, Машински факултет
Краљице Марије 16, 11120 Београд 35
тел. (+381 11) 3302-200, факс 3370364
mf@mas.bg.ac.rs
