Универзитет у Београду

Đorđević Aleksandar, Premović-Zecević Milena, Minić Dusko, Manasijević Dragan, Radicević Branko, Kolarević Nenad, Ristić Vladica (2022). Experimental Study of the Phase Equilibria in the Ternary Ga-Ge-Zn System, Journal of Phase Equilibria and Diffusion, 43(2), 176-192.
Springer, New York, ISSN: 1547-7037, 10.1007/s11669-022-00952-x, M22.

Premović Milena, Đorđević Aleksandar, Minić Dusko, Manasijević Dragan, Radicević Branko, Kolarević Nenad, Ristić Vladica (2022). Thermodynamic description and electrical conductivity of the Ge-In-Zn system: Experiments and modeling, Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, 77.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0364-5916, 10.1016/j.calphad.2022.102432, M22.

Kolarević Nenad, Ognjanović Milosav, Miloš Marko (2018). Failures of multifunctional bulkhead caused by high gradient of temperature, pressure and speed of rotation, Engineering Failure Analysis, 89, 100-117.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2018.02.022, M22.

Davidović Nikola, Kolarević Nenad, Stanković Miloš, Miloš Marko (2022). Research of expendable turbojet tubular combustion chamber, Advances in Mechanical Engineering, 14(5).
Sage Publications Ltd, London, ISSN: 1687-8132, 10.1177/16878132221095999, M23.

Kolarević Nenad, Stanković Miloš, Miloš Marko, Davidović Nikola (2022). Analysis and design of the gas generator multifunctional bulkhead considering the thermal and structural loads, Advances in Mechanical Engineering, 14(8).
Sage Publications Ltd, London, ISSN: 1687-8132, 10.1177/16878132221115939, M23.

Stanković Miloš, Kolarević Nenad, Davidović Nikola, Miloš Marko (2022). Influence of the air pressure and oil amount to the temperature of the high-speed bearings lubricated by oil mist, Industrial Lubrication and Tribology, 74(3), 335-341.
Emerald Group Publishing Ltd, Bingley, ISSN: 0036-8792, 10.1108/ILT-06-2021-0222, M23.

Đorđević Aleksandar, Premović Milena, Minić Duško, Tomović Milica, Radičević Branko, Kolarević Nenad (2020). Mechanical and electrical properties of the Bi-Ge-Sn alloys, Metallurgical and Materials Engineering, 26(26), 395-415.
The Netherlands Press, ISSN: 2217-8961, 10.30544/562, M24.

Stanković Miloš, Marinković Aleksandar, Kolarević Nenad (2019). Wear simulation of the polymer based composite sliding bearings by means of ansys, Proceedings on Engineering Sciences, 1(1), 66-69.
Faculty of Engineering, University of Kragujevac, ISSN: 2620-2832, 10.24874/PES01.01.008, M33.

Stanković Miloš, Marinković Aleksandar, Kolarević Nenad (2018). Calculation of the Archard's wear coefficient of the polymer-based composite sliding bearings, Machine Design, 10(3), 99-102.
Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad, ISSN: 1821-1259, 10.24867/MD.10.2018.3.99-102, M52.

Kolarević Nenad, Crnojević Stevan, Stanković Miloš, Latković Nenad, Miloš Marko (2020). Experimental verification of performance of tip-jet helicopter propulsion system, Materials Today-Proceedings, 32, 112-117.
Elsevier, Amsterdam, ISSN: 2214-7853, 10.1016/j.matpr.2020.03.080, M14.

Kolarević Nenad, Crnojević Stevan, Stanković Miloš, Miloš Marko (2019). Indirect approach of measuring the axial force on turbo-jet engine rotor, Materials Today: Proceedings, 12, 335-339.
Elsevier Ltd, ISSN: 2214-7853, 10.1016/j.matpr.2019.03.132, M14.

Kolarević Nenad, Kosanović N., Miloš Marko (2018). Crucial parameters of gas generator on tip-jet helicopter, Materials Today: Proceedings, 5(13), 26715-26720.
Elsevier Ltd, ISSN: 2214-7853, 10.1016/j.matpr.2018.08.141, M14.

Ognjanović Milosav, Miloš Marko, Kolarević Nenad (2016). Testing and prediction of structural failures caused by fretting, Materials Today-Proceedings, 3(4), 1103-1107.
Elsevier Science Bv, Amsterdam, ISSN: 2214-7853, 10.1016/j.matpr.2016.03.056, M14.

Crnojević Stevan, Latković N., Kolarević Nenad, Miloš Marko (2019). Experimental verification of numerical simulation of the flow inside the TIP-JET helicopter propulsion system, 36th Danubia Adria Symposium on Advances in Experimental Mechanics, DAS 2019.
University of West Bohemia, M32.

Antić Jovana, Kosić Boris, Kolarević Nenad, Bekrić Dragoljub (2024). Geometrical design of gears using motion analysis in cad software, JIDEG - Papers of the 9th Internacional Conference on Engineering Graphics and Design ICEGD 2024, 19(1).
Bucharest, Romania : SORGING, ISSN: 1843-3766, M33.

Ognjanović Milosav, Stanković Miloš, Kolarević Nenad (2018). Heat transfer and lubrication of turboshaft motor-reducer, IOP Conference Series: Materials Science and Engineering, 393(1).
Institute of Physics Publishing, ISSN: 1757-8981, 10.1088/1757-899X/393/1/012045, M33.

Kolarević Nenad, Micković D., Crnojević Stevan, Stanković Miloš, Ognjanović Milosav, Miloš Marko (2018). Dynamic stability of high speed turboshaft engine with reducer, IOP Conference Series: Materials Science and Engineering, 393(1).
Institute of Physics Publishing, ISSN: 1757-8981, 10.1088/1757-899X/393/1/012070, M33.

Kolarević Nenad, Stanković Miloš, Crnojević Stevan, Micković D., Miloš Marko (2018). Measuring the axial force on turbo-jet engine rotor, 35th Danubia Adria Symposium on Advances in Experimental Mechanics.
DANUBIA Adria Symposium on Advances in Experimental Mechanics, M34.

Kosanović N., Kolarević Nenad, Miloš Marko, Jojić Branislav (2016). Testing of tip-jet helicopter rotor lift force, 33rd Danubia Adria Symposium on Advances in Experimental Mechanics.
DANUBIA Adria Symposium on Advances in Experimental Mechanics, M34.

Kolarević Nenad, Davidović Nikola, Miloš Predrag, Jojić Branislav, Miloš Marko (2013). Experimental determination of light helicopter rotor lift characteristics with tip-jet propulsion system, 30th DANUBlA-ADRIA Symposium on Advances in Experimental Mechanics, DAS 2013 - Proceedings.
Croatian Society of Mechanics, M34.

Stanković Miloš, Marinković Aleksandar, Kolarević Nenad (2018). Calculation of the Archard’s wear coefficient of the polymer-based composite sliding bearings, KOD 2018 – The 10th International Conference on Machine And Industrial Design In Mechanical Engineering.
ISBN: 978-86-6022-059-4.

Ognjanović Milosav, Kolarević Nenad, Stanković Miloš, Vasin Sanja (2017). Gear Transmission Failures and Failure Based Design, 8th International Scientific Conference “IRMES 2017”, September 7-9, 2017, Trebinje, BiH.
ISBN: 978-9940-527-53-2.

Davidović Nikola, Miloš Predrag, Kolarević Nenad, Ivanov Toni, Jojić Branislav (2021). Study of innovative subsonic ramjet, Lecture Notes in Networks and Systems, 153, 413-431.
Springer, ISSN: 2367-3370, 10.1007/978-3-030-58362-0_24, M14.