Универзитет у Београду

Djurdjević Đorđe, Maneski Taško, Milošević-Mitić Vesna, Anđelić Nina, Ignjatović Dragan (2018). Failure investigation and reparation of a crack on the boom of the bucket wheel excavator ERS 1250 Gacko, Engineering Failure Analysis, 92, 301-316.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2018.05.015, M22.

Nagiar Hasan M., Maneski Taško, Milošević-Mitić Vesna, Gaćeša Branka, Anđelić Nina (2014). Modeling of the buckstay system of membrane walls in watertube boiler construction, Thermal Science, 18, S59-S72.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI120204174N, M22.

Milošević-Mitić Vesna, Maneski Taško, Anđelić Nina, Milović Ljubica, Petrović Ana, Gaćeša Branka (2014). Dynamic temperature field in the ferromagnetic plate induced by moving high frequency inductor, Thermal Science, 18, S49-S58.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI130216173M, M22.

Durdević Đorđe, Anđelić Nina, Maneski Taško, Milošević-Mitić Vesna, Đurđević Andrijana, Konjatić Pejo (2019). Numerical-Experimental Determination of Stress and Deformation State in Connecting Lugs with the Effect of Contact Area Size, Tehnički vjesnik, 26(2), 380-384.
Univ Osijek, Tech Fac, Slavonski Brod, ISSN: 1330-3651, 10.17559/TV-20180122105145, M23.

Anđelić Nina, Milošević-Mitić Vesna (2012). Optimum design of thin-walled i-beam subjected to stress constraint, Journal of Theoretical and Applied Mechanics, 50(4), 987-999.
Polish Society of Theoretical and Allied Mechanics, ISSN: 1429-2955, M23.

Anđelić Nina (2011). Nonlinear Approach to Thin-Walled Beams with a Symmetrical Open Section, Strojniski Vestnik-Journal of Mechanical Engineering, 57(1), 69-77.
Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, ISSN: 0039-2480, 10.5545/sv-jme.2008.061, M23.

Milošević-Mitić Vesna, Kozak Dražan, Maneski Taško, Anđelić Nina, Gaćeša Branka, Stojkov Marinko (2010). Dynamic Nonlinear Temperature Field in a Ferromagnetic Plate Induced by High Frequency Electromagnetic Waves, Strojarstvo, 52(2), 115-124.
Croation Union of Mech. Engineers and Naval Architects, ISSN: 0562-1887, M23.

Anđelić Nina, Milošević-Mitić Vesna, Maneski Taško (2009). An Approach to the Optimization of a Thin-walled Z-beam, Strojniski Vestnik/Journal of Mechanical Engineering, 55(12), 742-748.
ISSN: 0039-2480, M23.

Milošević-Mitić Vesna, Petrović Ana, Anđelić Nina, Jovanović Miloš (2024). The Influence of Temperature Gradient on Thin Plates Bending, FME Transactions, 52(1), 128-135.
ISSN: 1451-2092, 10.5937/fme2401128M, M24.

Đurđević Đorđe, Anđelić Nina, Đurđević Andrijana, Petrović Ana, Milošević-Mitić Vesna, Ivljanin Bojan (2023). Thin-walled omega profile exposed to constrained torsion-analytical and numerical stress and strain calculation, Structural integrity and life/Integritet i vek konstrukcija, 23(2), 225-229.
ISSN: 1451-3749, M24.

Durdević Đorđe, Sedmak Simon, Đurđević Andrijana, Anđelić Nina, Maneski Taško (2021). Development and calculation of supporting structure for mining power equipment, Structural Integrity and Life-Integritet I Vek Konstrukcija, 21(2), 173-177.
Institut za ispitivanje materijala, Beograd, ISSN: 1451-3749, M24.

Durdević Đorđe, Đurđević Andrijana, Anđelić Nina, Petrović Ana (2021). Numerical-experimental determination of stress and deformation state in connection lugs, Structural Integrity and Life-Integritet I Vek Konstrukcija, 21(2), 169-172.
Institut za ispitivanje materijala, Beograd, ISSN: 1451-3749, M24.

Durdević Đorđe, Anđelić Nina, Milošević-Mitić Vesna, Maneski Taško, Rakin Marko, Đurđević Andrijana (2019). Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation, Structural Integrity and Life, 19(3), 251-254.
Institut za ispitivanje materijala, Beograd, ISSN: 1451-3749, M24.

Gašić Vlada, Ćoćić Aleksandar, Anđelić Nina (2018). Uticaj horizontalnih inercijalnih sila kod konzolnih nosača sa promenljivim poprečnim presekom, FME Transactions, 46(3), 342-346.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet1803342G, M24.

Durdević Đorđe, Anđelić Nina, Maneski Taško, Đurđević Andrijana (2017). Numerical analysis of stress and strain state of structural elements of container terminal, Structural Integrity and Life-Integritet I Vek Konstrukcija, 17(3), 235-238.
Institut za ispitivanje materijala, Beograd, ISSN: 1451-3749, M24.

Anđelić Nina, Milošević-Mitić Vesna, Petrović Ana (2014). Naponska ograničenja primenjena na optimizaciju tankozidih Z - profila, FME Transactions, 42(3), 237-242.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet1403237A, M24.

Milović Ljubica, Milošević-Mitić Vesna, Radaković Zoran, Anđelić Nina, Petrovski Blagoj (2013). Procena nosivosti posude pod pritiskom u prisustvu prsline, Integritet i vek konstrukcija, 13(1), 9-16.
Institut za ispitivanje materijala, Beograd, ISSN: 1451-3749, M24.

Milošević-Mitić Vesna, Gaćeša Branka, Anđelić Nina, Maneski Taško (2012). Numerički proračun vodenog cevnog kotla primenom konačnih elemenata ortotropne ploče, Structural Integrity and Life, 12(3), 185-190.
Institut za ispitivanje materijala, Beograd, ISSN: 1451-3749, M24.

Anđelić Nina (2012). Tankozidi otvoreni poprečni preseci izloženi ograničenoj torziji, FME Transactions, 40(2), 93-98.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, M24.

Anđelić Nina, Milošević-Mitić Vesna, Petrović Ana, Đurđević Đorđe (2024). A View of The Influence of Constrained Torsion on Behaviour of Thin-Walled Cantilever Channel-Section and Z-Section Beams, Conference on Mechanical Engineering Technologies and Applications”, COMETa 2024, East Sarajevo, 2024.
ISBN: 978-99976-085-2-9, M33.

Maneski Taško, Milošević-Mitić Vesna, Milović Ljubica, Jovanović Miloš, Anđelić Nina, Petrović Ana (2022). Identification of the cause of incorrect work of bumper paint robot reducer, ECF23, European Conference on Fracture 2022, Procedia Structural Integrity.
M33.

Anđelić Nina, Milošević-Mitić Vesna, Petrović Ana, Đurđević Đorđe (2021). One View on the Optimization of Thin-walled Cantilever Channel and Z-section Beams, Proceedings of the 8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia.
ISBN: 978-86-909973-8-1, M33.

Milošević-Mitić Vesna, Anđelić Nina, Milović Ljubica, Maneski Taško (2019). Analytical Determination of the Dynamic Temperature Field of a Steel Sample Exposed to Intense Heating by Applying a Line-Heat-Source, Proceedings of the 13th International Conference on the Mechanical Behaviour of Materials (ICM 13), Melbourne, Australia.
ISBN: 978-1-922016-65-2, M33.

Đurđević Andrijana, Sedmak Aleksandar, Rakin Marko, Anđelić Nina, Đurđević Đorđe (2019). Thermo Mechanical Welding Process - Friction Stir Welding, Proceedings of the 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia.
ISBN: 978-86-909973-7-4, M33.

Durdević Đorđe, Anđelić Nina, Maneski Taško, Milošević-Mitić Vesna, Petrović Ana, Đurđević Andrijana (2018). Development of numerical-experimental model of connecting lugs and application on the lugs calculation of container terminals, Procedia Structural Integrity - ECF22 - Loading and environmental effects on structural integrity, 13, 1676-1681.
Elsevier Science Bv, Amsterdam, ISSN: 2452-3216, 10.1016/j.prostr.2018.12.350, M33.

Gašić Vlada, Ćoćić Aleksandar, Anđelić Nina (2017). Warping torsion of non-uniform thin-walled open section at cantilever beams, Proceedings of XXII International Conference on “Material Handling, Constructions and Logistics” - MHCL 2017.
University of Belgrade: Faculty of Mechanical Engineering, ISBN: 978-86-7083-949-6, M33.

Anđelić Nina, Milošević-Mitić Vesna, Maneski Taško, Đurđević Đorđe (2017). Minimum Weight of Open Section Thin-Walled Structural Elements Under Stress Constraint, Proceedings of the 6th International Congress of Serbian Society of Mechanics (IConSSM 2017), Tara, Serbia.
ISBN: 978-86-909973-6-7, M33.

Anđelić Nina, Milošević-Mitić Vesna, Maneski Taško, Milovančević Milorad, Đurđević Đorđe (2015). Optimum Design of Open Section Thin-Walled Structural Elements According to Stress Constraint, Proceedings of the 6th International Sympozium on Industrial Engineering (SIE 2015).
ISBN: 978-86-7083-864-2, M33.

Đurđević Đorđe, Anđelić Nina, Maneski Taško, Milošević-Mitić Vesna, Milovančević Milorad, Đurđević Andrijana (2015). Analytical and Numerical Calculation of the Equivalent Stress of Open Section Thin-Walled U Profile at Constrained Torsion, Proceedings of the 7th International Scientific and Expert Conference of the International TEAM Society, Belgrade, Serbia.
ISBN: 978-86-7083-877-2, M33.

Anđelić Nina, Milošević-Mitić Vesna, Maneski Taško, Petrović Ana (2013). Stress analysis of thin-walled structural elements of turbine blade shape, Proceedings of the 4-th Serbian Congress On Theoretical And Applied Mechanics.
M33.

Milošević-Mitić Vesna, Maneski Taško, Anđelić Nina (2011). Bending of a Thin Plate Subjected to Strong Uniform Magnetic Field, Proceedings of the 3th International Congress of Serbian Society of Mechanics,Vlasina Lake, Serbia.
ISBN: 978-86-909973-3-6, M33.

Milović Ljubica, Manjgo Mersida, Anđelić Nina, Milošević-Mitić Vesna, Jeli Zorana, Dondur Nikola (2011). Behaviour of P91 Steel Simulated Haz at 600°C, Proceedings of the15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2011, Prague Czech Republic.
ISSN: 1840-4944, M33.

Maneski Taško, Milošević-Mitić Vesna, Anđelić Nina (2009). Numerical Dynamic Analysis of the Influence of the Supports and Interconnections of Fire Engine Structural Parts, Proceedings of the 2nd International Congress of Serbian Society of Mechanics, Palić, Serbia.
ISSN: 978-86-7892-173-5, M33.

Milošević-Mitić Vesna, Anđelić Nina (2009). Experimental Verification of the Dynamic Numerical Model of a Fire Engine Structural Part, Proceedings of The XIX International Conference on “Material handling, constructions and Logistics’’, MHCL ‘09, Belgrade, Serbia.
ISBN: 978-86-7083-672-3, M33.

Maneski Taško, Milošević-Mitić Vesna, Ignjatović Dragan, Anđelić Nina (2007). Diagnostic of the dynamic behavior of drive unit, Proceedings of the 1th International Congress of Serbian Society of Mechanics.
ISBN: 978-86-909973-0-5, M33.

Anđelić Nina, Milošević-Mitić Vesna (2007). The optimization of a thin walled I-beam subjected to displacement constraint, Proceedings of the 1th International Congress of Serbian Society of Mechanics, 2007.
ISBN: 978-86-909973-0-5, M33.

Milošević-Mitić Vesna, Anđelić Nina (2006). Dynamic behavior of the elements of gear-box, Proceedings of The XVIII International Conference on “Material handling, constructions and Logistics’’, MHCL ‘06, Belgrade, Serbia.
ISBN: 978-86-7083-571-1, M33.

Anđelić Nina, Maneski Taško, Milošević-Mitić Vesna (2006). Uticaj spojnice na dinamičko ponašanje elektromotora/The Influence of the Coupling on the Dynamic Behavior of Electromotor, Proceedings of the 7-th International Symposium ‘Mechanization and Automation in Mining and Energrtics’ MAREN 2006, Belgrade.
ISBN: 86-7325-175-0, M33.

Milošević-Mitić Vesna, Maneski Taško, Anđelić Nina (2004). Deformation and Stress Fields in Thin Metallic Partially Fixed Plate Induced by Electromagnet with Constant Flux Obtained by Analytical Method and FEM, The First International conference on computational mechanisc (CM’04).
ISBN: 978-86-7589-042-7, M33.

Petrović Ana, Momčilović Nikola, Đorđević Branislav, Aranđelović Mihajlo, Sedmak Simon, Milošević-Mitić Vesna, Anđelić Nina (2024). Importance of welded joint characterization in construction designing, European Conference on Fracture 2024 (ECF24).
M34.

Milović Ljubica, Dojčinović Marina, Jegdić Bore, Anđelić Nina, Milošević-Mitić Vesna (2019). Corrosion and Cavitation resistance of P/T91 Steel, Abstract Book - 13th International Conference on the Mechanical Behaviour of Materials, 11-14 June, Melbourne, Australia.
M34.

Anđelić Nina, Rosić Božidar, Milošević-Mitić Vesna (2007). Mathematical modelling and multicriteria design optimization of a thin-walled beam, Book of abstracts, Ninth Yugoslav Materials Research Society Conference ‘’YUCOMAT 2007’’, 2007, Herceg Novi, Montenegr.
ISBN: 978-86-80321-11-0, M34.

Milošević-Mitić Vesna, Maneski Taško, Anđelić Nina (2006). Uticaj impulsnog magnetnog polja na termičko opterećenje tanke metalne ploče/The Influence of the Impulsiv Magnetic Field on Tempereture Loading of Thin Metallic Plate, Book of abstracts, Symposium Power Plantes 2006, Vrnjačka Banja.
ISBN: 86-7877-009-0, M34.

Đurđević Đorđe, Anđelić Nina, Maneski Taško, Đurđević Andrijana (2016). Numerička analiza napona uške na kontejnerskom terminalu 10800x3400/Stress numerical analysis of the conneting lug on container terminal 10800x3400, Zbornik radova/Proceedings the 40th ЈУПИТЕР Conference with foreign participants, University of Belgrade, Faculty of Mechanical Engineering, Belgrade.
ISBN: 978-86-7083-893-2, M63.

Ružić Dobroslav, Anđelić Nina (1997). One Approach to the Nonlinear Behaviour of Thin Walled Beams with Symmetrical Open Sections, Proceedings of the Second Serbian-Greek Symposium on Solid Mechanics (held from november 14-15, 1996), Serbia Academy of Science and Art, SANU, Scientific meetings, Volume LXXXVII, Department on Technical Sciences, Book 3 (editor Academician Petar Miljanic), Belgrade, LXXXVII(3), 321-329.
ISBN: 86-7025-263-5, M33.

Maneski Taško, Milošević-Mitić Vesna, Anđelić Nina (2008). Numerical and experimental diagnostics of the behaviour of the palette-pack machine, Machine Design University of Novi Sad, Faculty of technical sciences, ADEKO, Novi Sad, 2008.
ISBN: 978-86-7892-105-6, M45.

Anđelić Nina (2005). Оптимизација танкозидих конструкционих елемената, Задужбина Андрејевић, 194.
ISSN: 0354-7671, ISBN: 978-86-7244-457-4.