Универзитет у Београду

Машински факултет

latћир | eng

ВЕСТИ СЕРВИСИ АЛУМНИ ПОШТА

почетак » Факултет » Наставници » Срђан М. Бошњак
You are not allowed to perform this action

Sidebar


Срђан М. Бошњак

др Срђан М. Бошњак, редовни професор
Катедра за механизацију
Кабинет: 138
Мејл адреса: sbosnjak@mas.bg.ac.rs
Телефон: локал 290; директан 3302-290

Термини за пријем студената

Понедељак: 10,00-12,00

Предмети

Дизајн подсистема грађевинских и рударских машина
Динамика и чврстоћа рударских и грађевинских машина
Елементи машина за механизацију
Завршни предмет - Основе грађевинских и рударских машина
Изабрана поглавља из ТКЛ
Основе грађевинских и рударских машина
Основе динамике рударских и грађевинских машина
Рударске и грађевинске машине

Истраживачка област

Механика рударских и грађевинских машина

Образовање, стручна спрема

Дипломирани машински инжењер: 1985, Универзитет у Београду-Машински факултет Магистар техничких наука: 1991, Универзитет у Београду-Машински факултет Доктор техничких наука: 1995, Универзитет у Београду-Машински факултет

Публикације, признања, награде

Публиковао један универзитетски уџбеник, 66 радова у научним часописима међународног значаја (36 у часописима са SCI листе), 37 радова у научним часописима националног значаја, саопштио и публиковао 85 радова на међународним и 35 радова на националним научним скуповима, публиково једно поглавље у монографији међународног и пет поглавља у монографијама националног значаја, реализовао 35 техничких решења. Награде: • Теслина награда за врхунско инжењерско техничко-технолошко остварење (2011); • Годишња награда Инжењерске коморе Србије за изузетно остварење у струци (2009); • Шест Годишњих награда Привредне коморе Београда за техничко унапређење (2002, 2005, 2009, 2010, 2011, 2012); • Годишња награда Привредне коморе Београда за дипломски рад (1985); • Две златне медаље са ликом Николе Тесле на Међународној изложби проналазака, нових технологија и индустријског дизајна (2009, 2010); • Сребрна медаља са ликом Николе Тесле на Међународној изложби проналазака, нових технологија и индустријског дизајна (2011).

Чланства у научним и стручним организацијама

Редовни члан Академије инжењрских наука Србије Члан Српског друштва за механику Члан Инжењерске коморе Србије

Библиографија

Gnjatović Nebojša, Bošnjak Srđan, Stefanović Aleksandar Z. (2023). Analysis of the Dynamic Response as a Basis for the Efficient Protection of Large Structure Health Using Controllable Frequency-Controlled Drives, Mathematics, 11(1).
MDPI (Basel, Switzerland), ISSN: 2227-7390, doi.org/10.3390/math11010154, M21a.

Pantelić Milorad P., Bošnjak Srđan, Misita Mirjana, Gnjatović Nebojša, Stefanović Aleksandar Z. (2020). Service FMECA of a bucket wheel excavator, Engineering Failure Analysis, 108.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2019.104289, M21.

Gnjatović Nebojša, Bošnjak Srđan, Milenović Ivan Lj., Stefanović Aleksandar Z. (2020). Bucket wheel excavators: Dynamic response as a criterion for validation of the total number of buckets, Engineering Structures, 225.
Elsevier Sci Ltd, Oxford, ISSN: 0141-0296, 10.1016/j.engstruct.2020.111313, M21.

Bošnjak Srđan, Zrnić Nenad, Momčilović Dejan B., Gnjatović Nebojša, Milenović Ivan Lj. (2020). Tie-rods of the bucket wheel excavator slewing superstructure: A study of the eye plate stress state, Engineering Structures, 207.
Elsevier Sci Ltd, Oxford, ISSN: 0141-0296, 10.1016/j.engstruct.2020.110233, M21.

Zrnić Nenad, Gašić Vlada, Bošnjak Srđan (2015). Dynamic responses of a gantry crane system due to a moving body considered as moving oscillator, Archives of Civil and Mechanical Engineering, 15(1), 243-250.
Elsevier Urban & Partner Sp Z O O, Wroclaw, ISSN: 1644-9665, 10.1016/j.acme.2014.02.002, M21.

Bošnjak Srđan, Oguamanam Donatus, Zrnić Nenad (2015). The influence of constructive parameters on response of bucket wheel excavator superstructure in the out-of-resonance region, Archives of Civil and Mechanical Engineering, 15(4), 977-985.
Springernature, London, ISSN: 1644-9665, 10.1016/j.acme.2015.03.009, M21.

Bošnjak Srđan, Petković Zoran D., Simonović Aleksandar, Zrnić Nenad, Gnjatović Nebojša (2013). 'Designing-in' failures and redesign of bucket wheel excavator undercarriage, Engineering Failure Analysis, 35, 95-103.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2012.12.007, M21.

Bošnjak Srđan, Momčilović Dejan B., Petković Zoran D., Pantelić Milorad P., Gnjatović Nebojša (2013). Failure investigation of the bucket wheel excavator crawler chain link, Engineering Failure Analysis, 35, 462-469.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2013.04.025, M21.

Bošnjak Srđan, Petković Zoran D., Atanasovska Ivana, Milojević Goran, Mihajlović Vaso M. (2013). Bucket chain excavator: Failure analysis and redesign of the counterweight boom supporting truss columns, Engineering Failure Analysis, 32, 322-333.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2013.04.012, M21.

Arsić Miodrag, Bošnjak Srđan, Zrnić Nenad, Sedmak Aleksandar, Gnjatović Nebojša (2011). Bucket wheel failure caused by residual stresses in welded joints, Engineering Failure Analysis, 18(2), 700-712.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2010.11.009, M21.

Bošnjak Srđan, Arsić Miodrag A., Zrnić Nenad, Rakin Marko, Pantelić Milorad P. (2011). Bucket wheel excavator Integrity assessment of the bucket wheel boom tie-rod welded joint, Engineering Failure Analysis, 18(1), 212-222.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2010.09.001, M21.

Bošnjak Srđan, Pantelić Milorad P., Zrnić Nenad, Gnjatović Nebojša, Đorđević Miloš (2011). Failure analysis and reconstruction design of the slewing platform mantle of the bucket wheel excavator O&K SchRs 630, Engineering Failure Analysis, 18(2), 658-669.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2010.09.035, M21.

Trifković Dragan, Stupar Slobodan, Bošnjak Srđan, Milovančević Milorad, Krstić Branimir, Rajić Zoran, Dunjić Momčilo (2011). Failure analysis of the combat jet aircraft rudder shaft, Engineering Failure Analysis, 18(8), 1998-2007.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2011.05.017, M21.

Milenović Ivan Lj., Bošnjak Srđan, Gnjatović Nebojša, Obradović Aleksandar (2022). Bucket wheel excavators with a kinematic breakdown system: Identification and monitoring of the basic parameters of static stability of the slewing superstructure, Eksploatacja I Niezawodnosc-Maintenance and Reliability, 24(2), 359-370.
Polish Maintenance Soc, Lublin, ISSN: 1507-2711, 10.17531/ein.2022.2.17, M22.

Bošnjak Srđan, Arsić Miodrag A., Gnjatović Nebojša, Milenović Ivan Lj., Arsić Dušan M. (2018). Failure of the bucket wheel excavator buckets, Engineering Failure Analysis, 84, 247-261.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2017.11.017, M22.

Bošnjak Srđan, Gnjatović Nebojša, Milenović Ivan Lj. (2018). From 'a priori' to 'a posteriori' static stability of the slewing superstructure of a bucket wheel excavator, Eksploatacja I Niezawodnosc-Maintenance and Reliability, 20(2), 190-206.
Polish Maintenance Soc, Lublin, ISSN: 1507-2711, 10.17531/ein.2018.2.04, M22.

Bošnjak Srđan, Gnjatović Nebojša, Savićević Sreten, Pantelić Milorad P., Milenović Ivan Lj. (2016). Basic parameters of the static stability, loads and strength of the vital parts of a bucket wheel excavator's slewing superstructure, Journal of Zhejiang University-Science A, 17(5), 353-365.
Zhejiang Univ, Hangzhou, ISSN: 1673-565X, 10.1631/jzus.A1500037, M22.

Bošnjak Srđan, Arsić Miodrag, Savićević Sreten, Milojević Goran, Arsić Dušan (2016). Fracture analysis of the pulley of a bucket wheel boom hoist system, Eksploatacja I Niezawodnosc-Maintenance and Reliability, 18(2), 155-163.
Polish Maintenance Soc, Lublin, ISSN: 1507-2711, 10.17531/ein.2016.2.1, M22.

Bošnjak Srđan, Savićević Sreten, Gnjatović Nebojša, Milenović Ivan Lj., Pantelić Milorad P. (2015). Disaster of the bucket wheel excavator caused by extreme environmental impact: Consequences, rescue and reconstruction, Engineering Failure Analysis, 56, 360-374.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2015.01.002, M22.

Arsić Miodrag A., Bošnjak Srđan, Odanović Zoran, Dunjić Momčilo, Simonović Aleksandar (2012). Analysis of the spreader track wheels premature damages, Engineering Failure Analysis, 20, 118-136.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2011.11.005, M22.

Bošnjak Srđan, Zrnić Nenad (2012). Dynamics, failures, redesigning and environmentally friendly technologies in surface mining systems, Archives of Civil and Mechanical Engineering, 12(3), 348-359.
Elsevier Urban & Partner Sp Z O O, Wroclaw, ISSN: 1644-9665, 10.1016/j.acme.2012.06.009, M22.

Bošnjak Srđan, Petković Zoran D., Zrnić Nenad, Pantelić Milorad P., Obradović Aleksandar (2010). Failure analysis and redesign of the bucket wheel excavator two-wheel bogie, Engineering Failure Analysis, 17(2), 473-485.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2009.09.007, M22.

Bošnjak Srđan, Zrnić Nenad, Simonović Aleksandar, Momčilović Dejan B. (2009). Failure analysis of the end eye connection of the bucket wheel excavator portal tie-rod support, Engineering Failure Analysis, 16(3), 740-750.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2008.06.006, M22.

Bošnjak Srđan, Petković Zoran D., Zrnić Nenad, Simić Goran, Simonović Aleksandar (2009). Cracks, repair and reconstruction of bucket wheel excavator slewing platform, Engineering Failure Analysis, 16(5), 1631-1642.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2008.11.009, M22.

Zrnić Nenad, Bošnjak Srđan (2008). Comments on "Modeling of system dynamics of a slewing flexible beam with moving payload pendulum", Mechanics Research Communications, 35(8), 622-624.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 0093-6413, 10.1016/j.mechrescom.2008.05.004, M22.

Gnjatović Nebojša, Bošnjak Srđan, Milenović Ivan Lj. (2020). The influence of incrustation and chute blockage on the dynamic behaviour of a bucket wheel excavator slewing superstructure, Journal of Theoretical and Applied Mechanics, 58(3), 573-584.
Polish Soc Theoretical & Applied Mechanics, Warszawa, ISSN: 1429-2955, 10.15632/jtam-pl/121942, M23.

Gnjatović Nebojša, Bošnjak Srđan, Stefanović Aleksandar Z. (2018). The dependency of the dynamic response of a two mast bucket wheel excavator superstructure on the counterweight mass and the degree of fourier approximation of the digging resistance, Archives of Mining Sciences, 63(2), 491-509.
Polska Akad Nauk, Polish Acad Sciences, Warszawa, ISSN: 0860-7001, 10.24425/122909, M23.

Bošnjak Srđan (2015). comments on "determination and analysis of the theoretical production of a bucket wheel excavator", Archives of Mining Sciences, 60(1), 283-301.
Polish Acad Sciences, Warszawa, ISSN: 0860-7001, 10.1515/amsc-2015-0019, M23.

Rakin Marko, Arsić Miodrag, Bošnjak Srđan, Gnjatović Nebojša, Međo Bojan (2013). Integrity assessment of bucket wheel excavator welded structures by using the single selection method, Tehnički vjesnik, 20(5), 811-816.
Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, ISSN: 1330-3651, M23.

Bošnjak Srđan, Petković Zoran D., Gnjatović Nebojša, Milenović Ivan Lj., Jerman Boris (2013). Impact of the track wheel axles on the strength of the bucket wheel excavator two-wheel bogie, Tehnički vjesnik, 20(5), 803-810.
Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, ISSN: 1330-3651, M23.

Bošnjak Srđan, Petković Zoran D., Dunjić Momčilo, Gnjatović Nebojša, Đorđević Miloš (2012). Redesign of the vital subsystems as a way of extending the bucket wheel excavators life, Technics Technologies Education Management, 7(4), 1620-1629.
ISSN: 1840-1503, M23.

Zrnić Nenad, Bošnjak Srđan, Hoffmann K. (2010). Parameter sensitivity analysis of non-dimensional models of quayside container cranes, Mathematical and Computer Modelling of Dynamical Systems, 16(2), 145-160.
Taylor & Francis Inc, Philadelphia, ISSN: 1387-3954, 10.1080/13873951003676534, M23.

Bošnjak Srđan, Zrnić Nenad, Dragović Branislav (2009). Dynamic Response of Mobile Elevating Work Platform under Wind Excitation, Strojniski Vestnik/Journal of Mechanical Engineering, 55(2), 104-113.
ISSN: 0039-2480, M23.

Zrnić Nenad, Hoffmann K., Bošnjak Srđan (2009). Modelling of dynamic interaction between structure and trolley for mega container cranes, Mathematical and Computer Modelling of Dynamical Systems, 15(3), 295-311.
Taylor & Francis Inc, Philadelphia, ISSN: 1387-3954, 10.1080/13873950902927675, M23.

Putić Slaviša, Bošnjak Srđan, Bošnjak Srđan (2008). Application of the residual strength degradation model to carbon-epoxy composite, Materials Science, 44(3), 446-450.
Consultants Bureau/Springer, New York, ISSN: 1068-820X, 10.1007/s11003-008-9094-y, M23.

Putić Slaviša, Stamenović Marina, Bajčeta Branislav B., Stajčić Predrag S., Bošnjak Srđan (2007). Uticaj visokih i niskih temperatura na udarna svojstva stakleno−epoksidnih kompozita, Journal of The Serbian Chemical Society, 72(7), 713-722.
Srpsko hemijsko društvo, Beograd, ISSN: 0352-5139, 10.2298/JSC0707713P, M23.

Универзитет у Београду, Машински факултет
Краљице Марије 16, 11120 Београд 35
тел. (+381 11) 3302-200, факс 3370364
mf@mas.bg.ac.rs

контакт | мапа сајта