Универзитет у Београду

Jelić Aleksandra, Sekulić Milica, Travica Milan, Grzetić Jelena, Ugrinović Vukašin, Marinković Aleksandar D., Bozić Aleksandra, Stamenović Marina, Putić Slaviša (2022). Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC), Polymers, 14(6).
MDPI, Basel, ISSN: 2073-4360, 10.3390/polym14061255, M21.

Milošević Nenad, Younise Bashir, Sedmak Aleksandar, Travica Milan, Mitrović A. (2021). Evaluation of true stress-strain diagrams for welded joints by application of Digital Image Correlation, Engineering Failure Analysis, 128.
Pergamon-Elsevier Science Ltd, Oxford, ISSN: 1350-6307, 10.1016/j.engfailanal.2021.105609, M21.

Mitrović Nenad, Golubović Zorana, Mitrović Aleksandra, Travica Milan, Trajković Isaak, Milošević Miloš, Petrović Aleksandar (2024). Influence of Aging on the Flexural Strength of PLA and PLA-X 3D-Printed Materials, Micromachines, 15(3).
ISSN: 2072-666X, 10.3390/mi15030395, M22.

Golubović Zorana, Travica Milan, Trajković Isaak, Petrović Aleksandar, Mišković Žarko, Mitrović Nenad (2023). Investigation of thermal and dimensional behavior of 3-D printed materials using thermal imaging and 3-D scanning, Thermal Science, 27, 21-31.
Beograd : Institut za nuklearne nauke Vinča, ISSN: 0928-4931, 10.2298/TSCI2301021G, M23.

Mitrović Nenad, Mitrović Aleksandra, Travica Milan (2023). TENSILE TESTING OF FLAT THIN SPECIMENS USING THE TWO-DIMENSIONAL DIGITAL IMAGE CORRELATION METHOD, Structural Integrity and Life, 23, 9-13.
M24.

Jelić A., Travica Milan, Ugrinović Vukašin, Božić A., Stamenović Marina, Brkić D., Putić Slaviša (2022). Comparison of Tensile Properties of Carbon/Epoxy Composite Materials with Different Fiber Orientation Using Digital Image Correlation, Lecture Notes in Networks and Systems, 323, 239-255.
Springer Science and Business Media Deutschland GmbH, ISSN: 2367-3370, 10.1007/978-3-030-86009-7_13, M33.

Travica Milan, Mitrović Nenad, Petrović Aleksandar (2024). OPTICAL METHODS APPLIED FOR TESTING PIPE RING SPECIMENS, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2024.
University of Belgrade - Faculty of Mechanical Engineering, ISBN: 978-86-6060-191-1, M34.

Mitrović Nenad, Mitrović Aleksandra, Travica Milan (2024). APPLICATION OF 2D DIGITAL IMAGE CORRELATION METHOD IN FRACTURE MECHANICS, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2024.
University of Belgrade - Faculty of Mechanical Engineering, ISBN: 978-86-6060-191-1, M34.

Mitrović Nenad, Mitrović Aleksandra, Pajević Tina, Marinković Nemanja, Travica Milan (2024). DIMENSIONAL ACCURACY OF SINTERED DENTAL METALWORK: EVALUATING 3D PRINTING PRECISION FROM INTRAORAL SCANS TO FINAL FIT, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2024.
University of Belgrade - Faculty of Mechanical Engineering, ISBN: 978-86-6060-191-1, M34.

Jevtić Ivana, Mladenović Goran, Milošević Miloš, Milovanovic Aleksa, Trajković Isaak, Travica Milan (2022). Mechanical characteristics of parts obtained by sls printing technology, 3rd International Workshop on Reliability and Design of Additively Manufactured Materials, The Book Of Abstracts, 4-6. October 2022, Belgrade, Serbia.
University of Belgrade – Faculty of Mechanical Engineering, ISBN: 978-86-6060-140-9, M34.

Golubović Zorana, Travica Milan, Trajković Isaak, Petrović Aleksandar, Mišković Žarko, Mitrović Nenad (2022). Investigation of Thermal and Dimensional Behavior of 3D Printed Materials Using Thermal Imaging and 3D Scanning, Proceedins of the 35th International Conference of Process Industry - Processing 2022.
ISBN: 978-86-85535-12-3, M34.

Jevtić Ivana, Travica Milan, Trajković Isaak, Milošević Miloš, Mitrović Nenad (2024). Sintering process in dentistry, Serbian Ceramic Society Conference - ADVANCED CERAMICS AND APPLICATION XII New Frontiers in Multifunctional Material Science and Processing.
Serbian Ceramic Society, ISBN: 978-86-905714-1-3.

Mitrović Nenad, Golubović Zorana, Mitrović Aleksandra, Travica Milan, Trajković Isaak, Milošević Miloš, Petrović Aleksandar (2023). APPLICATION OF 2D DIGITAL IMAGE CORRELATION METHOD ON THREE-POINT BENDING IN MATERIAL TESTING, International Scientific and Professional Conference Politehnika 2023.
The Academy of Applied Technical Studies “Belgrade”, ISBN: 978-86-7498-110-8.

Travica Milan, Mitrović Nenad, Petrović Aleksandar (2023). STRAIN BEHAVIOR ANALYSIS OF STEEL S235JRH RING SPECIMENS, International Scientific and Professional Conference Politehnika 2023.
The Academy of Applied Technical Studies “Belgrade”, ISBN: 978-86-7498-110-8.

Golubović Zorana, Mitrović Aleksandra, Travica Milan (2022). Possibilities in Production of 3D Printed Contact Lenses, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2022” - Book of Abstracts.
University of Belgrade, Faculty of Mechanical Engineering, ISBN: 978-86-6060-120-1.

Travica Milan, Mitrović Nenad, Petrović Aleksandar, Trajković Isaak, Milošević Miloš, Sedmak Aleksandar, Berto Filippo (2022). PIPE RING TENSILE SPECIMENS STRAIN MEASUREMENT, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022.
Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-120-1.

Obradović Katarina, Dragičević Aleksandra, Travica Milan, Miljković Suzana, Mitrović Nenad (2022). ANALYSIS OF THE INFLUENCE OF THREE DIFFERENT COSMETIC DEVICES ON SKIN SAMPLES USING A THERMOVISION CAMERA, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022.
Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-120-1.

Trajković Isaak, Međo Bojan, Milošević Miloš, Travica Milan, Mitrović Nenad, Rakin Marko (2021). RAZVOJ DIZAJNA EPRUVETA OBLIKA PRSTENA SA DVE PRSLINE ZA ISPITIVANJE PARAMETARA MEHANIKE LOMA, Politehnika 2021.
Akademija tehničkih strukovnih studija Beograd, ISBN: 978-86-7498-087-3.

Travica Milan, Mitrović Nenad, Petrović Aleksandar (2021). EKSPERIMENTALNA POSTAVKA ZA ISPITIVANJE EPRUVETA OBLIKA PRSTENA, Politehnika 2021.
Akademija tehničkih strukovnih studija Beograd, ISBN: 978-86-7498-087-3.

Golubović Zorana, Travica Milan, Mitrović Aleksandra, Trajković Isaak, Mitrović Nenad (2021). MOGUĆNOSTI PRAĆENJA TEMPERATURNOG POLJA NAKON PROCESA 3D ŠTAMPE, Politehnika 2021.
Akademija tehničkih strukovnih studija Beograd, ISBN: 978-86-7498-087-3.

Milovanović Aleksa, Milošević Miloš, Mladenović Goran, Travica Milan, Mitrović Nenad, Kirin Snežana, Trajković Isaak (2020). Experimental and numerical integrity assessment of home window profiles and frames, 4th International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2020, Zlatibor, June 29-July 02..
Innovation Center of Faculty of Mechanical Engineering, ISBN: 978‐86‐6060‐042‐6.

Mitrović Nenad, Petrović Aleksandar, Travica Milan, Milošević Miloš, Čudić Bojan (2020). 3D-DIC METHOD IN STRUCTURAL HEALTH MONITORING OF PRESSURE VESSELS, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2020.
Innovation Center of Faculty of Mechanical Engineering, ISBN: 978‐86‐6060‐042‐6.

Travica Milan, Mitrović Nenad, Petrović Aleksandar (2020). PIPE RING SPECIMEN TEST PROCEDURE USING DIC METHOD WITH THREE CAMERAS, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2020.
Innovation Center of Faculty of Mechanical Engineering, ISBN: 978‐86‐6060‐042‐6.

Milošević Miloš, Milovanović Aleksa, Mladenović Goran, Kolesar Svetozar, Pandžić Adi, Travica Milan, Mitrović Nenad (2019). Analysis Of Parameter Impact On 3d Printed Experimental Samples For Tensile Testing, 3rd International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2019, Zlatibor, July 04-06..
Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-009-9.

Milovanovic Aleksa, Milošević Miloš, Maneski Taško, Mitrović Nenad, Travica Milan, Poštić Srđan, Mladenović Goran (2019). Development of the experimental methodology of strain measurement simulated in partly-edentulous artificial mandible, 3rd International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2019, Zlatibor, July 02-05..
Belgrade : Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-009-9.

Travica Milan, Mitrović Nenad, Batinić Radivoje, Petrović Aleksandar (2019). INFLUENCE OF THE SIZE AND POSITION OF WINDOWS BLINDS ON HEAT LOSSES, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2019.
Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-6060-009-9.

Milošević Miloš, Poštić Srđan, Mitrović Nenad, Milovanović Aleksa, Travica Milan, Golubović Zorana, Mladenović Goran (2018). Experimental setup development of additively manufactured mandible with teeth and compensations subjected to compressive load, Loading and Environment Effects on Structural Integrity (book of abstracts), 22nd European Conference on Fracture - ECF22, Belgrade, 26 - 31 August, 2018.
Faculty of Technology and Metallurgy, Research and Development Centre of Printing Technology, ISBN: 978-86-900686-0-9.

Travica Milan, Mitrovic Nenad, Petrovic Aleksandar, Mitrović Nenad (2018). COMPARISON BETWEEN DIFFERENT CALCULATION PROCEDURES OF LOADS CAUSED BY TEMPERATURE DILATATION IN PIPELINES, International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2018.
Innovation Center of Faculty of Mechanical Engineering, ISBN: 978-86-7083-979-3.

Golubović Zorana, Travica Milan, Mitrović Nenad, Trajković Isaak, Milošević Miloš (2024). Development of a Method for Testing Temperature Distribution During 3D Printing of Specimens with Application in Aerospace Industry, New Trends in Engineering Research, 792, 90-95.
Springer, ISBN: 978-3-031-46431-7, 10.1007/978-3-031-46432-4_7.