Универзитет у Београду

Benišek Miroslav, Čantrak Đorđe, Ilić Dejan, Janković Novica (2020). New Design of the Reversible Jet Fan, Processes, 8(12).
MDPI, Basel, ISSN: 2227-9717, 10.3390/pr8121671, M22.

Benišek Miroslav, Lečić Milan, Čantrak Đorđe, Ilić Dejan (2017). THE SCHOOL OF THE TURBULENT SWIRLING FLOW AT THE FACULTY OF MECHANICAL ENGINEERING UNIVERSITY OF BELGRADE, Thermal Science, 21, Suppl. 3, S899-S911.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI160628094B, M22.

Ilić Dejan, Benišek Miroslav, Čantrak Đorđe (2017). EXPERIMENTAL INVESTIGATIONS OF THE TURBULENT SWIRL FLOW IN STRAIGHT CONICAL DIFFUSERS WITH VARIOUS ANGLES, Thermal Science, 21, Suppl. 3, S725-S736.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI160205193I, M22.

Benišek Miroslav, Lečić Milan, Ilić Dejan, Čantrak Đorđe (2010). APPLICATION OF NEW CLASSICAL PROBES IN SWIRL FLUID FLOW MEASUREMENTS, Experimental Techniques, 34(3), 74-81.
Wiley-Blackwell, Malden, ISSN: 0732-8818, 10.1111/j.1747-1567.2009.00482.x, M22.

Ilić Dejan, Janković Novica, Čantrak Đorđe, Savić Ljubomir (2024). Experimental and numerical research of the flow inside the control valves trim, Thermal Science, 28(1B), 579-587.
VINČA Institute of Nuclear Sciences, ISSN: 0354-9836, 10.2298/TSCI230405157I, M23.

Benišek Miroslav, Ilić Dejan, Čantrak Đorđe, Božić Ivan (2010). INVESTIGATION OF THE TURBULENT SWIRL FLOWS IN A CONICAL DIFFUSER, Thermal Science, 14, S141-S154.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, 10.2298/TSCI100630026B, M23.

Ilić Dejan, Čantrak Đorđe, Janković Novica (2018). INTEGRAL AND STATISTICAL CHARACTERISTICS OF THE TURBULENT SWIRL FLOW IN A STRAIGHT CONICAL DIFFUSER, Theoretical and Applied Mechanics, 45(2), 127-137.
Srpsko društvo za mehaniku, Beograd, ISSN: 1450-5584, 10.2298/TAM171201012I, M24.

Čantrak Đorđe, Janković Novica, Ilić Dejan (2015). Investigation of the turbulent swirl flow in pipe generated by axial fans using PIV and LDA methods, Theoretical and Applied Mechanics, 42(3), 211-222.
Serbian Society of Mechanics, Belgrade and Mathematical Institute of the Serbian Academy of Sciences and Arts, Belgrade, 10.2298/TAM1503211C, M24.

Benišek Miroslav, Ignjatović Branislav, Nedeljković Miloš, Čantrak Đorđe, Ilić Dejan, Božić Ivan (2008). Презентација резултата истраживања, развоја и освајања малих хидроелектрана са Банки турбинама, ЕНЕРГЕТИКА 2008, Лист Савеза енергетичара: Енергија, економија, екологија.
ISSN: 0354-8651, M51.

Benišek Miroslav, Božić Ivan, Ilić Dejan, Čantrak Đorđe (2006). Eksperimentalna hidraulička ispitivanja karakteristika cevne turbine HE 'Đerdap II', Vodoprivreda, 38(4-6), 189-198.
Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, ISSN: 0350-0519, M51.

Benišek Miroslav, Čantrak Svetislav, Nedeljković Miloš, Čantrak Đorđe, Ilić Dejan, Božić Ivan (2006). Fluid boundaries shaping using the method of kinetic balance, Thermal Science, 10 (Suppl. 4)(15), 153-162.
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, ISSN: 0354-9836, M51.

Benišek Miroslav, Čantrak Svetislav, Nedeljković Miloš, Ilić Dejan, Božić Ivan, Čantrak Đorđe (2005). Primena Lagranžeovog principa virtuelnog rada za određivanje optimalnog oblika uvodne komore Banki turbine, FME Transactions, 33(3), 141-144.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, M51.

Čantrak Đorđe, Janković Novica, Ristić Slavica, Ilić Dejan (2014). Influence of the Axial Fan Blade Angle on the Turbulent Swirl Flow Characteristics, Scientific Technical Review, 64(3), 23-30.
Vojnotehnički institut, Beograd, ISSN: 1820-0206, M52.

Ilić Dejan (2023). High accuracy installations for flowmeter calibration with volumetric-weighing method, 36th International Congress on Process Industry - PROCESING ‘23, 1-2. june 2023, Šabac, Srbija, 36(1), 293-299.
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), ISBN: 978-86-85535-15-4, M31.

Čantrak Đorđe, Janković Novica, Ilić Dejan (2022). Савремене мерне технике у Лабораторији за турбуленцију и мерење брзине струјања флуида, Светски дан метрологије, „Метрологија у дигиталној ери“, 20. мај 2022., Машински факултет у Београду.
M31.

Miranović Danilo, Ilić Dejan (2024). ГУБИТАК ЕНЕРГИЈЕ НА РЕШЕТКАМА, Conference Proceedings, IX Regional International Conference “IEEP 2024”, May 29-31, 2024, Chamber of Commerce and Industry of Serbia, Belgrade, Serbia..
Belgrade : Society of Thermal Engineers of Serbia, ISSN: 3042-1403, ISBN: 978-86-7877-037-1, M33.

Čantrak Đorđe, Janković Novica, Ilić Dejan, Lečić Lazar (2023). Enstrophy Study of the Turbulent Swirling Flow in Pipe, 9th International Congress of the Serbian Society of Mechanics July 5-7, 2023, Vrnjačka Banja, Serbia.
Српско друштво за механику, ISBN: 978-86-909973-9-8, M33.

Čantrak Đorđe, Janković Novica, Ilić Dejan, Nedeljković Miloš (2022). LDV Investigation of the Self Induced Pre-Swirl and Flow Visualization at the Centrifugal Pump Inlet and Outlet, 39th IAHR World Congress, Proceedings, Ed.: Miguel Ortega-Sánchez, No. 06-08-039-1817, June 19-24th, Granada, Spain.
ISSN: 2521-7119, 10.3850/IAHR-39WC2521711920221817, M33.

Čantrak Đorđe, Savić Ljubomir, Janković Novica, Ilić Dejan (2022). CONTROL VALVES TRIM DESIGN, RETROFITTING AND TESTING, Full Papers Proceedings of International Conference “IEEP 2022”, November 08-09, 2022, Faculty of Mechanical Engineering of the University of Belgrade, Belgrade, Serbia.
ISBN: 978-86-7877-032-6, M33.

Čantrak Đorđe, Janković Novica, Ilić Dejan (2021). LDA Experimental Research of Turbulent Swirling Flow Behind the Axial Fans in Pipe, Jet and Diffuser, Lecture Notes in Networks and Systems, 153, 184-202.
Springer, ISSN: 2367-3370, 10.1007/978-3-030-58362-0_12, M33.

Savić Ljubomir, Janković Novica, Čantrak Đorđe, Ilić Dejan (2021). Sizing Valve Regulating Element, The 8th International Congress of Serbian Society of Mechanics, Kragujevac, Serbia, June 28-30 2021., Proceedings, Minisymposium M2: Turbulence, Eds.: Kojić M. and Filipović N..
Srpsko društvo za Mehaniku, ISBN: 978-86-909973-8-1, M33.

Janković Novica, Jeremić Đorđe, Čantrak Đorđe, Ilić Dejan (2020). Flow Uniformity and Turbulence Level Measurements by LDA in the Wind Tunnel for Anemometers Calibration, Proceedings, 9th International Scientific Conference on Defensive Technologies, OTEH 2020, Belgrade, Serbia, 15-16 October 2020., Session Quality, Standardization, Metrology, Maintenance and Exploitation, 6 pages, paper no. 013..
M33.

Čantrak Đorđe, Janković Novica, Nedeljković Miloš, Matijević Milan S., Ilić Dejan (2019). Lectures in Rotodynamic Pumps - from Design and Simulations to Testing, Proceedings / 2018 International Conference on Interactive Mobile Communication, Technologies and Learning (IMCL2018), McMaster University, Hamilton, Ontario, Canada, October 11-13, 909, 394-406.
Springer International Publishing Ag, Cham, ISSN: 2194-5357, 10.1007/978-3-030-11434-3_42, M33.

Nedeljković Miloš, Janković Novica, Čantrak Đorđe, Ilić Dejan, Matijević Milan S. (2019). Poster: Remote Engineering Education Set-Up of Hydraulic Pump and System, Smart Industry & Smart Education, 47, 304-311.
Springer International Publishing Ag, Cham, ISSN: 2367-3370, 10.1007/978-3-319-95678-7_35, M33.

Nedeljković Miloš, Čantrak Đorđe, Janković Novica, Ilić Dejan, Matijević Milan S. (2019). Virtual Instrumentation Used in Engineering Education Set-Up of Hydraulic Pump and System, Smart Industry & Smart Education, 47, 686-693.
Springer International Publishing Ag, Cham, ISSN: 2367-3370, 10.1007/978-3-319-95678-7_75, M33.

Čantrak Đorđe, Nedeljković Miloš, Janković Novica, Ilić Dejan (2019). DEMONSTRACIONI PUMPNI SISTEM, VII Regional conference, Industrial Energy and Environmental Protection in Southeastern Europe, Conference Proceedings, R-10.1.
Beograd : Društvo termičara Srbije, ISBN: 978-86-7877-033-3, M33.

Čantrak Đorđe, Ilić Dejan, Janković Novica, Radanov Branka (2019). Installation for the high accuracy flow meter calibration with the weighting method, 19th International Congress of Metrology (CIM2019), Article Number: 21001.
EDP Sciences, 10.1051/metrology/201921001, M33.

Ilić Dejan, Čantrak Đorđe, Janković Novica, Pajić Milan (2019). Experimental Investigations of the Flow Uniformity and Jet Development on the Free Jet Calibration Wind Tunnel, The 7th International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia, June 24-26 2019., Proceedings, Minisymposium M3: Turbulence, Eds.: Lazarević M. et al., paper No. M3e, 6 pages..
Serbian Society of Mechanics, M33.

Nedeljković Miloš, Janković Novica, Čantrak Đorđe, Ilić Dejan, Matijević Milan S. (2018). Engineering Education Lab Setup Ready for Remote Operation - Pump System Hydraulic Performance, Proceedings / 2018 IEEE Global Engineering Education Conference (EDUCON), April 17-20, Santa Cruz de Tenerife, Canary Islands, Spain.
IEEE, ISSN: 2165-9559, 10.1109/EDUCON.2018.8363362, M33.

Nedeljković Miloš, Čantrak Đorđe, Jaiiković Novica Z., Ilić Dejan, Matijević Milan S. (2018). Virtual Instruments and Experiments in Engineering Education Lab Setup with Hydraulic Pump, Proceedings / 2018 IEEE Global Engineering Education Conference (EDUCON), April 17-20, Santa Cruz de Tenerife, Canary Islands, Spain, 2018-April, 1145-1152.
IEEE, ISSN: 2165-9559, 10.1109/EDUCON.2018.8363358, M33.

Ćoćić Aleksandar, Raković Milan, Ilić Dejan, Lečić Milan (2017). Numerical computations of turbulent flow through orifice flowmeter, 6th International Congress of Serbian Society of Mechanics.
Srpsko društvo za Mehaniku, ISBN: 978-86-909973-6-7, M33.

Čantrak Đorđe, Banjac Miloš, Janković Novica, Ilić Dejan (2017). Pump System in the Energy Manager Training Center at the Faculty of Mechanical Engineering University of Belgrade, Sixth Regional Conference, Industrial Energy and Environmental Protection in South Eastern Europe Countries, Proceedings, Session: Pump units and systems - good practice and solutions for increasing energy efficiency, pp. 47.
Društvo termičara Srbije, ISBN: 978-86-7877-028-9, M33.

Ilić Dejan, Čantrak Đorđe, Janković Novica (2017). REYNOLDS NUMBER INFLUENCE ON INTEGRAL AND STATISTICAL CHARACTERISTICS OF THE TURBULENT SWIRL FLOW IN STRAIGHT CONICAL DIFFUSER, 6th International Congress of Serbian Society of Mechanics, Mountain Tara, Serbia, 19-21 June, Conference Proceedings, Minisymposium M2: Turbulence, Eds.: Lazarević M. et al., paper No. M2e, 6 pages.
Serbian Society of Mechanics, ISBN: 978-86-909973-6-7, M33.

Čantrak Đorđe, Janković Novica, Ilić Dejan, Lečić Milan (2016). Centrifugal pumps' impellers design and digital fabrication, 1st International Conference on Multidisciplinary Engineering Design Optimization, MEDO 2016.
Institute of Electrical and Electronics Engineers Inc., ISBN: 978-1-5090-2111-6, 10.1109/MEDO.2016.7746544, M33.

Čantrak Đorđe, Janković Novica, Ilić Dejan (2016). Statistical Characteristics and Time Autocorrelation Coefficients of the Turbulent Swirl Flow in Pipe, PAMM, Proceedings in Applied Mathematics and Mechanics, publishes the proceedings of the annual GAMM conferences, 16(1), 579-580.
John Wiley & Sons, Ltd, ISSN: 1617-7061, 10.1002/pamm.201610278, M33.

Benišek Miroslav, Božić Ivan, Čantrak Đorđe, Ilić Dejan (2011). Hydraulic Tests of the Bulb Turbine Unite at the Hydropower Plant „Djerdap 2“, 3rd International Symposium Contemporary Problems of Fluid Mechanics, May 12-13th, University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Chair of Fluid Mechanics, Proceedings.
ISBN: 978-86-7083-725-6, M33.

Jojić Ivan, Isakov Miodrag, Voronjec Dimitrije, Čantrak Đorđe, Ilić Dejan, Banjac Miloš (2010). Prikaz rezultata merenja i analize tehnoekonomskih parametara na realizovanom demonstracionom postrojenju za rekuperaciju toplote na VMA, Proceedings of the Second Regional Conference: Industrial Energy and Environmental Protection Southeast Europe - IEEP 2010, Tematska grupa 2B: Energetska efikasnost u zgradarstvu (Energy Efficiency in Building Constructioning).
Društvo termičara Srbije, ISBN: 978-86-7877-012-8, M33.

Benišek Miroslav, Božić Ivan, Ilić Dejan, Petrović Dragan, Ćirić Zoran (2010). HYDRAULIC AND POWER PERFORMANCE TESTS OF KAPLAN TURBINES IN HPP OVČAR BANJA, International conference Power Plants 2010.
Društvo termičara Srbije, ISBN: 978-86-7877-020-3, M33.

Čantrak Đorđe, Dondur Nikola, Čolić Damjanović Vesna Mila, Ilić Bratislav, Banjac Miloš, Babačev Nataša, Ilić Dejan, Kostić Dušan (2009). Economic Analysis of the Passive and Intelligent Multifamily Residential Building in Belgrade, Proceedings, 4th International Symposium of Industrial Engineering, SIE 2009., Industrial Engineering Department, Faculty of Mechanical Engineering, University of Belgrade and Steinbeis Advanced Risk Technologies, Stuttgart, Germany, Belgrade, December 10-11. 2009..
Belgrade : Faculty of Mechanical Engineering,, ISBN: 978-86-7083-681-5, M33.

Benišek Miroslav, Ilić Dejan, Čantrak Đorđe, Božić Ivan, Pajnić Mirko, Begović Miloš, Janković Novica (2009). FAN FOR ECOLOGICAL CONDITION SUSTAIN IN TUNNELS, Zbornik Međunarodnog kongresa o KGH, 2.-4.12.2009., BEOGRAD, 40(1), 320-331.
Beograd : SMEITS, ISBN: 978-86-81505-50-2, M33.

Janković Novica, Čantrak Đorđe, Ilić Dejan (2024). Average Velocity Field Downstream Distributions in the Free Turbulent Swirling Jet Generated by the Axial Fan Impeller with Twisted Blades, 2nd International Conference on Mathematical Modelling in Mechanics and Engineering, Mathematical Institute SANU, 12-14. September.
Mathematical Institute of the Serbian Academy of Sciences and Arts, Belgrade, ISBN: 978-86-80593-77-7, M34.

Čantrak Đorđe, Janković Novica, Ilić Dejan (2022). Enstrophy in Turbulent Swirling Flow in Pipe, 1st International Conference on Mathematical Modelling in Mechanics and Engineering, Booklet of Abstracts, Mathematical Institute of the Serbian Academy of Sciences and Arts, Belgrade, Serbia, 8-10 September 2022.
ISBN: 978-86-6060-127-0, M34.

Čantrak Đorđe, Janković Novica, Ilić Dejan, Nedeljković Miloš (2020). Educational Centrifugal Pump Test Rig, Book of Abstracts, 6th IAHR Europe Congress – Hydro Environment Research and Bioengineering, paper 62131228719, Feb. 15-18, 2021, Warsaw, Poland Special Session KS6: Measurement techniques and demonstration test rigs in hydraulic research.
M34.

Čantrak Đorđe, Janković Novica, Ilić Dejan (2020). Observations from LDA Research of the Turbulent Swirl Flow on the Axial Fan Pressure Side, International Conference of Experimental and Numerical Investigations and New Technolgies, CNN TECH 2020, Session: Clear sky, June 29-July 2, Zlatibor, Serbia, pp. 65.
ISBN: 978-86-6060-042-6, M34.

Čantrak Đorđe, Janković Novica, Ilić Dejan (2019). KOLMOGOROV LAW IN ANALYSIS OF THE TURBULENT SWIRL FLOW IN PIPE, Booklet of abstracts Symposium “Nonlinear dynamics –scientific work of Prof. Dr Katica (Stevanović) Hedrih”, Belgrade, 04.-06. September 2019., pp. 71.
Mathematical Institute of SASA, M34.

Ilić Dejan, Janković Novica, Slijepčević Miloš, Čantrak Đorđe (2018). High Accuracy Installation for Flow Meter Calibration with Weighing Method, Sixth International Conference on Applied Sciences ICAS2018, Book of Abstracts, pp. 121.
UNIVERSITY OF BANJA LUKA FACULTY OF MECHANICAL ENGINEERING, M34.

Janković Novica, Čantrak Đorđe, Ilić Dejan, Lečić Milan (2018). Insight into the Turbulent Swirl Jet behind the Axial Fan, Sixth International Conference on Applied Sciences ICAS2018, Book of Abstracts, pp. 120.
UNIVERSITY OF BANJA LUKA FACULTY OF MECHANICAL ENGINEERING, M34.

Janković Novica, Nedeljković Miloš, Atanasijević P., Čantrak Đorđe, Ilić Dejan (2021). Показно-образовна инсталација за испитивање пумпи у лабораторији и преко интернета, Зборник радова 19. научног саветовања Српског друштва за хидрауличка истраживања и Српског друштва за хидрологију, Београд, 18-19. октобар 2021.
Београд : Грађевински факултет, ISBN: 978-86-7518-219-1, M63.

Benišek Miroslav, Ilić Dejan, Čantrak Đorđe, Janković Novica (2015). HIGH ACCURACY INSTALLATION FOR CALIBRATION FLOW METER, Зборник радова, Конгрес метролога 2015, Уредници: Делчев С. и Огризовић В., Златибор, CD издање, 10 страна, Сесија 2., 12-15.10.2015.
Конгрес метролога, ISBN: 978-86-7518-182-8, M63.

Ignjatović Branislav, Benišek Miroslav, Nedeljković Miloš, Ilić Dejan, Čantrak Đorđe, Božić Ivan (2005). BANKI TURBINE – CONVINIENT SMALL HYDRAULIC TURBINE TYPE TO HARNESS POTENTIAL OF SMALL RIVERS, 12 Симпозијум термичара, Сокобања, 2005., Зборник на CD-у. Сокобања 18-21.10.2005., Друштво термичара СЦГ и Машински факултет у Нишу.
ISSN: 86-80587-51-6, M63.

Benišek Miroslav, Albijanić Radomir, Ignjatović Branislav, Božić Ivan, Ilić Dejan, Čantrak Đorđe (2006). Hydraulic аnd Vibration Tests оf Double-Regulated Prototype Hydraulic Turbines With тhe Aim оf Increasing The Energy Efficiency, Симпозијум ЕЛЕКТРАНЕ 2006, организатор: Друштво термичара Србије и Црне Горе, Врњачка Бања, 19-22. 09. 2006., Зборник проширених резимеа, стр. 11..
ISBN: 86-7877-009-0, M64.

Stanišić Ana, Nedeljković Miloš, Ilić Dejan (2018). ANALIZA KARAKTERISTIKA ZATVARAČA, Proceedings of the Conference, Program and Book of Abstracts POWER PLANTS 2018.
Society of Thermal Engineers of Serbia, ISBN: 978-86-7877-029-6.

Ilić Dejan (2015). Swirl flow in conical diffusers, Turbulence workshop - International symposium, University of Belgrade, Faculty of Mechanical Engineering, Book of Abstracts, 31.08–2.09.2015., Belgrade..
University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia, ISBN: 978–86-7083-865-9, M34.

Ilić Dejan, Čantrak Đorđe (2022). Praktikum za laboratorijske vežbe iz merenja pri strujanju fluida.
Машински факултет Универзитета у Београду, ISBN: 978-86-6060-132-4.

Ilić Dejan, Čantrak Đorđe (2017). Praktikum za laboratorijske vežbe iz merenja pri strujanju fluida.
Машински факултет Универзитета у Београду, ISBN: 978-86-7083-942-7.