Универзитет у Београду

Jakovljević Živana, Puzović Radovan, Pajić Miroslav (2015). Recognition of Planar Segments in Point Cloud Based on Wavelet Transform, IEEE Transactions on Industrial Informatics, 11(2), 342-352.
IEEE - Inst Electrical Electronics Engineers Inc, Piscataway, ISSN: 1551-3203, 10.1109/TII.2015.2389195, M21a.

Živanović Saša, Puzović Radovan (2016). Wire edm machining simulations based on step-nc program, Tehnički vjesnik, 23(6), 1831-1838.
Univ Osijek, Tech Fac, Slavonski Brod, ISSN: 1330-3651, 10.17559/TV-20151122180547, M23.

Tanović Ljubodrag, Bojanić Pavao, Puzović Radovan, Milutinović M. (2011). Experimental Investigation of Microcutting Mechanisms in Granite Grinding, Journal of Manufacturing Science and Engineering-Transactions of The Asme, 133(2).
Asme-Amer Soc Mechanical Eng, New York, ISSN: 1087-1357, 10.1115/1.4003521, M23.

Tanović Ljubodrag, Bojanić Pavao, Puzović Radovan, Klimenko Sergey (2011). Polycrystalline Cubic Boron Nitride (PCBN) Tool Life and Wear in Turning of Amorphous-Crystalline Iron-Based Coatings, Strojniski Vestnik-Journal of Mechanical Engineering, 57(12), 904-910.
Assoc Mechanical Engineers Technicians Slovenia, Ljubljana, ISSN: 0039-2480, 10.5545/sv-jme.2011.010, M23.

Tanović Ljubodrag, Bojanić Pavao, Puzović Radovan, Klimenko Sergey (2009). Experimental Investigation of Microcutting Mechanisms in Marble Grinding, Journal of Manufacturing Science and Engineering-Transactions of The Asme, 131(6).
ASME, New York, ISSN: 1087-1357, 10.1115/1.4000619, M23.

Pjević Miloš, Mladenović Goran, Tanović Ljubodrag, Puzović Radovan (2018). Savremeni pristup projektovanja kružnih profilnih strugarskih noževa za izradu delova složene geometrije, FME Transactions, 46(1), 80-85.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet1801080P, M24.

Živanović Saša, Puzović Radovan (2015). Off-line programiranje i simulacija dvoosne elektroerozione obrade sa žicom, FME Transactions, 43(2), 138-143.
Univerzitet u Beogradu - Mašinski fakultet, Beograd, ISSN: 1451-2092, 10.5937/fmet1502138Z, M24.

Živanović Saša, Puzović Radovan (2022). Konvertovanje virtuelne mašine iz različitih CAD/CAM okruženja i njeno konfigurisanje u izabranom okruženju, Tehnika, 77(1), 47-54.
Savez inženjera i tehničara Srbije, Beograd, ISSN: 0040-2176, 10.5937/tehnika2201047Z, M53.

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Stojadinović Slavenko (2020). The Development of CAD/CAM System for Automatic Manufacturing Technology Design for Part with Free Form Surfaces, Computational and Experimental Approaches in Materials Science and Engineering, Cnntech 2019, 90, 460-476.
Springer International Publishing Ag, Cham, ISSN: 2367-3370, 10.1007/978-3-030-30853-7_27, M14.

Pjević Miloš, Popović Mihajlo, Puzović Radovan (2022). Correlation between micro-cutting and static indentation, Proceedings of 6th International Scientific Conference - COMETa2022.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-947-6-8, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Popović Mihajlo, Pjević Miloš (2021). Software upgrade for automatic rough milling technology design for parts with free form surfaces, XXXVIII Savetovanje proizvodnog mašinstva Srbije SPMS 2021 - zbornik radova.
Faculty of technical sciences Čačak, University of Kragujevac, ISBN: 978-86-7776-252-0, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Milovanović Marko, Popović Mihajlo, Pjević Miloš, Simonović Vojislav (2020). Development of cam system for rough machining in free form surface manufacturing, Proceedings of 5th International Scientific Conference - COMETa2020.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-719-8-1, M33.

Pjević Miloš, Stojadinović Slavenko, Tanović Ljubodrag, Popović Mihajlo, Mladenović Goran, Puzović Radovan (2019). Determination of the Optimal Regression Model for the Measurement Quality Characteristics of the Micro Cutting Stone-Based Materials, Proceedings of The 12th International Conference on Measurement and Quality Control - Cyber Physical.
Springer-Verlag Berlin, Berlin, ISSN: 2195-4356, 10.1007/978-3-030-18177-2_18, M33.

Pjević Miloš, Popović Mihajlo, Tanović Ljubodrag, Puzović Radovan, Mladenović Goran (2018). Layers optimisation of the pla parts formed by additive technologies, Proceedings of 4th International Scientific Conference - COMETa2018.
University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, ISBN: 978-99976-719-4-3, M33.

Živanović Saša, Slavković Nikola, Dimić Zoran, Vasilić Goran, Puzović Radovan, Milutinović Dragan (2017). Virtual machine tools and robots for machining simulation based on STEP-NC program, Proceedings of 6th International Conference on Manufacturing Engineering ICMEN 2017.
Aristoteles University of Thessaloniki, ISBN: 978-618-80878-4-2, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš (2017). Software solution for automatic choise of cutting parameters in free form surfaces machining, Proceedings of XIV International Conference Maintenance and Production Engineering “KODIP - 2017”.
Engineering Academy of Montenegro, ISBN: 978-9940-527-51-8, M33.

Jakovljević Živana, Marković Veljko, Puzović Radovan, Majstorović Vidosav D. (2016). Recognition of one class of quadrics from 3D point clouds, Procedia CIRP - 49th CIRP Conference on Manufacturing Systems (CIRP-CMS 2016), 57, 292-297.
Elsevier B.V., ISSN: 2212-8271, 10.1016/j.procir.2016.11.051, M33.

Jakovljević Živana, Puzović Radovan (2013). Detection of planar segments in point cloud using wavelet transform, Proceedings of the 35th International Conference on Production Engineering.
ISBN: 978-86-82631-69-9, M33.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Popović Mihajlo (2013). Analysis Of Machining Strategies Using Commercial CAD/CAM Software, Proceedings, 35th International Conference on Production Engineering ICPE 2013.
Kraljevo : Faculty of Mechanical and Civil Engineering in Kraljevo, ISBN: 978-86-82631-69-9, M33.

Mladenović Goran, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Jevtić Ivana (2022). Strategies development for rough milling in free form surfaces machining, International Conference of Experimental and Numerical Investigations and New Technologies - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-120-1, M34.

Pjević Miloš, Popović Mihajlo, Puzović Radovan, Mladenović Goran (2022). Part deformability prediction during the milling of AlMgSi1 (6082) material, International Conference of Experimental and Numerical Investigations and New Technologies - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-120-1, M34.

Pjević Miloš, Popović Mihajlo, Mladenović Goran, Tanović Ljubodrag, Puzović Radovan (2021). Applicability of rapid tooling in injection molding application, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2021” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-077-8, M34.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Jevtić Ivana (2021). Rough milling with end mill cutter in apllication for free form surfaces machining, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2021” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-077-8, M34.

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo (2020). Concept development for rough milling of free form surfaces, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2020” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-042-6, M34.

Mladenović Goran, Milovanović Marko, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo, Stojadinović Slavenko (2019). Development of application software for automatic manufacturing techology design of free form surfaces, International Conference of Experimental and Numerical Investigations and New Technologies “CNN TECH 2019” - Book of Abstracts.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-009-9, M34.

Tanović Ljubodrag, Bojanić Pavao, Glavonjić Miloš, Milutinović Dragan, Majstorović Vidosav, Puzović Radovan, Kokotović Branko, Popović Mihajlo, Živanović Saša, Slavković Nikola, Mladenović Goran, Stojadinović Slavenko (2012). Razvoj nove generacije domaćih obradnih sistema – rezultati istraživanja za 2011. godinu, Zbornik radova - 38. JUPITER konferenencija.
Univerzitet u Beogradu, Mašinski fakultet, Katedra za proizvodno mašinstvo, ISBN: 978-86-7083-757-7, M61.

Milutinović Dragan, Glavonjić Miloš, Tanović Ljubodrag, Bojanić Pavao, Puzović Radovan, Živanović Saša, Kokotović Branko, Popović Mihajlo, Slavković Nikola, Mladenović Goran (2011). Rezultati istraživanja i razvoja nove generacije obradnih sistema, Zbornik radova - 37. JUPITER konferenencija.
Univerzitet u Beogradu, Mašinski fakultet, Katedra za proizvodno mašinstvo, ISBN: 978-86-7083-724-9, M61.

Živanović Saša, Tanović Ljubodrag, Puzović Radovan, Kokotović Branko, Slavković Nikola, Popović Mihajlo, Mladenović Goran, Stojadinović Slavenko, Pjević Miloš, Vorkapić Nikola, Dimić Zoran, Rakić Aleksandar, Manasijević Srećko (2022). Revitalizacija horizontalne bušilice glodalice LOLA HBG 80 upravljanjem otvorene arhitekture na LinuxCNC platformi, 43 JUPITER konferencija : zbornik radova, Beograd, oktobar 2022.
Univerzitet u Beogradu Mašinski Fakultet, ISBN: 978-86-6060-137-9, M63.

Spasojević Bojana, Popović Mihajlo, Pjević Miloš, Mladenović Goran, Puzović Radovan (2022). Simulacija procesa kovanja primenom naprednih softverskih alata, 43. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-6060-137-9, M63.

Nedeljković Dušan, Stanojević Stefan, Puzović Radovan, Jakovljević Živana (2021). Integracija proizvodnih resursa u sistem za izvršavanje proizvodnje korišćenjem opc-ua, Proceedings of the International Scientific Conference ETIKUM 2021, Novi Sad, 2021.
University of Novi Sad, Faculty of Technical Sciences, Department of Production Engineering, ISBN: 978-86-6022-387-8, M63.

Tanović Ljubodrag, Živanović Saša, Puzović Radovan, Kokotović Branko, Popović Mihajlo, Slavković Nikola, Mladenović Goran, Stojadinović Slavenko, Pjević Miloš, Vorkapić Nikola (2020). Razvoj nove generacije domaćih obradnih sistema rezultati istraživanja za 2019. godinu, 42 JUPITER konferencija : zbornik radova, Beograd, oktobar 2020.
Univerzitet u Beogradu Mašinski Fakultet, ISBN: 978-86-6060-054-9, M63.

Jakovljević Živana, Nedeljković Dušan, Ševarlić Filip, Puzović Radovan (2020). Communication between manufacturing resources using opc-ua standard, 42. JUPITER Konferencija, 44. simpozijum „Upravljanje proizvodnjom u industriji prerade metala“, Zbornik radova / 42nd JUPITER Conference, Proceedings, Beograd, oktobar 2020, 4.1-4.12.
University of Belgrade - Faculty of Mechanical Engineering, ISBN: 978-86-6060-055-6, M63.

Mladenović Goran, Tanović Ljubodrag, Milovanović Marko, Popović Mihajlo, Puzović Radovan, Pjević Miloš (2020). Development of a system for automatic technology design for pre-machining of parts with free form surfaces, Zbornik radova 42. JUPITER konferencije, 29. simpozijum CAD/CAM.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-6060-055-6, M63.

Mladenović Goran, Tanović Ljubodrag, Puzović Radovan, Pjević Miloš, Popović Mihajlo (2018). The development of software solution for automatic choise of machining parameters for free form surfaces parts, Zbornik radova 41. JUPITER konferencije, 28. simpozijum CAD/CAM.
Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-978-6, M63.

Pjević Miloš, Mladenović Goran, Puzović Radovan, Tanović Ljubodrag (2014). Primena cad/cam sistema u projektovanju i izradi profilnih kruznih strugarskih nozeva, 41. Jupiter Konferencija - Zbornik Radova.
University of Belgrade, faculty of Mechanical Engineering, ISBN: 978-86-7083-838-3, M63.

Tanović Ljubodrag, Bojanić Pavao, Puzović Radovan, Popović Mihajlo, Mladenović Goran (2011). The application of the CAD/CAM/CAE program package in the design and manufacturing of casting pressure tools for parts made from polymers, Zbornik radova, 37. JUPITER konferencija, 24. simpozijum CAD/CAM.
Beograd : Univerzitet u Beogradu - Mašinski fakultet, ISBN: 978-86-7083-724-9, M63.

Tanović Ljubodrag, Bojanić Pavao, Milutinović Dragan, Glavonjić Miloš, Puzović Radovan, Kokotović Branko, Živanović Saša, Popović Mihajlo, Slavković Nikola, Mladenović Goran (2009). Развој технологија вишеосне обраде сложених алата за потребе домаће индустрије – Рекапитулација резултата на пројекту МА14034, Зборник радова - 35. ЈУПИТЕР конферененција, 31. симпозијум НУ-Роботи-ФТС.
Универзитет у Београду, Машински факултет, Катедра за производно машинство, ISBN: ISBN 978-86-7083-666-2, M63.

Glavonjić Miloš, Milutinović Dragan, Živanović Saša, Dimić Zoran (2007). Configuration of a hybrid 5-axis machine, 33. JUPITER konferenencija, 29. simpozijum NU-Roboti-FTS.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 978-86-7083-592-4, M63.

Živanović Saša, Dimić Zoran (2007). Controling model of 3 axis parallel kinematic machines based on EMC system software, 33. JUPITER konferenencija, 29. simpozijum NU-Roboti-FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 978-86-7083-592-4, M63.

Glavonjić Miloš, Milutinović Dragan, Živanović Saša (2006). Three axis parallel mechanism with specific solutions of passive translatory joint, 32. JUPITER konferencija, 28. simpozijum NU - Roboti - FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-557-6, M63.

Simonović Aleksandar, Živanović Saša (2005). CAD/CAM of mold for helicopter rotor composite blade, 31. JUPITER konferencija, 18. simpozijum CAD/CAM, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-508-8, M63.

Glavonjić Miloš, Milutinović Dragan, Živanović Saša (2005). CAD interpretations of three axes parallel kinematics machine pn101, 27. simpozijum NU - Roboti - FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-508-8, M63.

Milutinović Dragan, Glavonjić Miloš, Kvrgić Vladimir, Živanović Saša (2005). Novi paralelni mehanizam za glodalice sa dugačkom X osom, 31. JUPITER konferencija, 27. simpozijum NU - Roboti - FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-508-8, M63.

Glavonjić Miloš, Milutinović Dragan, Živanović Saša, Kvrgić Vladimir, Višnjić Zoran (2004). One 3 – DOF Parallel Kinematic Machine, 30. JUPITER konferencija, 26. simpozijum NU - Roboti - FTS, Zbornik radova.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-488-X, M63.

Živanović Saša (2004). Variability of parallel kinematic machines with linear actuators configuring, 30. JUPITER konferencija, Plenarna sednica, 26. simpozijum NU - Roboti - FTS, Zbornik radova, Plenarna sesija.
Univerzitet u Beogradu, Mašinski fakultet, ISBN: 86-7083-488-X, M63.

Puzović Radovan, Tanović Ljubodrag, Miljković Zoran, Stošić Dejan (2002). Analysis and Possible Directions of Improvement of the Taps Design, 29. Svetovanje proizvodnog mašinstva Jugoslavije, Zbornik radova / 29th Conference on production engineering, Proceedings - CD (in Serbian).
Beograd : LOLAInstitut, М63.

Kalajdžić Milisav, Tanović Ljubodrag, Babić Bojan, Glavonjić Miloš, Miljković Zoran, Puzović Radovan, Kokotović Branko, Popović Mihajlo, Živanović Saša, Tošić Dragan, Vasić Ivan (2021). CUTTING TECHNOLOGY: handbook, UNIVERZITET U BEOGRADU - MAŠINSKI FAKULTET (COBISS.SR-ID - 48397833).
Mašinski fakultet Univerziteta u Beogradu, ISBN: 978-86-6060-097-6.